Clevis Head Innerduct Pulling Eye

Condux Product
Condux Product
Clevis Head Innerduct Pulling Eye

Catalog

Same tapered threads as the standard innerduct pulling eye, these pulling eyes feature a slotted head with clevis pin to permit direct attachment to any Condux multiple pulling harness leg ends.  When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions recommended by the innerduct manufacturers. 

NOTE:  To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.).  The I.D. measurement must be greater than dimension A and smaller than dimension B.

Parts

Part Number

Nominal Size

Innerduct I.D. Range

Max O.D.

Hole Dia.

Slot Width

Slot Depth

Pin Dia.

Pin Center

(in)     (mm)

A - B (in) (mm)

C (in) (mm)

D (in) (mm)

E (in) (mm)

F (in) (mm)

G (in) (mm)

H (in) (mm)

08914310*

.75" (19mm)

.71" - .87" (18-22mm)

1.25" (32mm)

.25 "(6mm)

.56" (14mm)

1.34" (34mm)

.38" (10mm)

.59" (15mm)

08914320*

1.00" (25mm)

.93" - 1.06" (24-27mm)

1.38" (35mm)

.25 "(6mm) 

.56" (14mm) 

1.34" (34mm) 

.44" (11mm)

.56" (14mm)

08914330*

1.25" (32mm)

1.06" - 1.43" (27-37mm)

1.75" (44mm)

.38" (10mm)

.75" (19mm)

1.78" (45mm)

.63" (16mm)

.81" (21mm)

08914340*

1.50" (38mm)

1.37" - 1.68" (35-43mm)

2.00" (51mm)

.38" (10mm)

.75" (19mm)

1.78" (45mm)

.63" (16mm)

.72" (18mm)

08914350*

1.75" (44mm)

1.68" - 1.81" (43-46mm)

2.25" (57mm)

.38" (10mm)

.75" (19mm)

1.78" (45mm)

.63" (16mm)

.72" (18mm)

08914360**

2.00" (51mm)

1.93" - 2.12" (49-54mm)

2.50" (62mm)

.38" (10mm)

.75" (19mm)

2.50" (62mm)

.88" (22mm)

1.23" (31mm)

*Will fit all Condux pulling harnesses

**Will fit the Condux 3/8" and 1/2" cable pulling harnesses

Questions and Answers

There are no questions and answers for this product.